| Model |
RT5312-2T Series |
| Industrial grade
design |
Use high performance industrial wireless module |
| Use high performance industrial 32bit
processor |
| Support low power consumption mode,
customized |
| Use plate metal CRS shell with good heat
dissipation |
| Power supply: +7.5V~+32V DC |
| Network
characteristic |
Port flow detection |
| Link real-time monitoring |
| Multiple VPN protocol
(PPTP、L2TP、IPSec、VPN…) |
| Support serial port DTU function |
| Support dialing as required (voice, SMS
or data trigger) |
| Support UPnP |
| Stability |
Use soft/hardware watchdog and multi-level link detection, |
| with capability of fault automatic
diagnosis, automatic |
| recovery, ensure equipment working in
stable and security way |
| Multiple equipment self-checking
mechanism, ensure smooth link and alarm |
| ESD protection for each port, prevent
static shock |
| Remote management |
Remote parameters configuration |
| Remote parameters backup |
| Remote restart and log query |
| Remote equipment upgrading |
| Equipment online monitoring |
| Functions |
Down compatible to HSPA+、EVDO、TD-Scdma、EDGE、GPRS network |
| Support 3 x LAN and 1 x WAN /LAN |
| Provide standard RS-232/485 serial port,
support serial |
| port DTU (data transmission terminal)
function |
| Support hardware WDT, provide anti-log
off mechanism, |
| ensure data terminal online forever |
| Support multiple VPN protocol (PPTP, L2TP
or GRE etc.) |
| Support multiple functions (DHCP, DDNS,
firewall, NAT, DMZ host etc.) |
| Support wired and wireless mutual backup |
| Support multiple network protocol
(ICMP、TCP、UDP、Telnet、SSH、FTP、HTTP、HTTPS etc.) |
| Support industrial SIM/UIM card design |
Support 300M 802.11n Wi-Fi or 866M 802.11ac |
| Support base station and Wi-Fi hybrid positioning |
| Extend functions |
Support WAN port, wired and wireless mutual backup (optional) |
| Support dual LAN port function (optional) |
| Support build-in storage extension, 8-128GB(optional) |
| Support extend GPS (optional) |
| Wireless
parameter |
Wireless module: Industrial grade wireless module |
| Bands: |
| LTE（MIMO）: FDD-Band 1 / 2 / 3 / 5 / 7 / 8
/ 20 / 28 |
| (Band 1/ 2 / 4 /5 / 7 / 8 / 12 / 13 / 17
/ 25 / 26) |
| TDD- Band 38 / 39 / 40 / 41 |
| UMTS(WCDMA): 2100MHz / 1900MHz / 900MHz /
850MHz |
| GSM/GPRS/EDGE: 1900MHz / 1800MHz / 900MHz
/ 850MHz |
| Theory bandwidth: MAX DL: 100Mbps ；MAX
UL:50Mbps （Category 3，MIMO） |
| Transmit power: 23dBm+/-1dB @25℃ |
| Consumption: Data mode <300mA/12V ； Idle modem | <160mA/12V |
| Receive sensitivity: -97dBm @10MHz QPSK |
| Interface type |
LAN: 1 Ethernet interface (RJ45), self-adaption MDI/MDIX, |
| built-in electromagnetic isolation
protection |
| WAN/LAN: 1 WAN/LAN port multiplex,
suitable for wired |
| dialing or used as LAN port hung on two
terminals |
| Console: Equipment monitoring port,
standard RJ45 |
| interface, support hardware flow control
RS232 |
| communication mode |
| Indicator: Six indicator lights, 3
“Signal strength LED”, |
| “Power”, “WLAN”, “Error”. 3 signal
strength indicator lights (1: poor. 2: general. 3: good.) |
| Antenna interface: 1 Main antenna
interface (3G/4G) ， |
| characteristic impedance 50Ω ； 1 Aux/GPS
antenna |
| interface, used as 3G/4G AUX antenna or
GPS |
| function active antenna ； 2 WiFi 802.11n
antenna interface |
| SIM/UIM interface: SIM/UIM engineering
card cover, |
| protect the card from falling. 1.8V/3V
automatic detection, support dual SIM card. |
| Power interface: +7.5V~32V (standard DC 12V/1.5A) ， |
| built-in power instantaneous overvoltage
protection and opposite connection protection |
| Reset: Press this button, the parameters
will return to factory setting |
| Power supply |
Standard power: DC 12V/1.5A |
| Digital output: （ used to control and
drive external equipment, such as relay switch） |
| High level: +5V |
| Low level: 0V |
| Pulse（definable frequency）or status level |
Digital input:
（ used to detect signal status of external switch, to trigger the alarm
etc.） |
47KΩ ohm |
| NPN base，4.7KΩ resistance +5V pull up |
| ON: +3.0V ~ +5.0V DC |
| OFF: 0 ~ 0.6V |
| Count mode |
| Share DC GND |
| Isolation protection: |
3K VDC or 2K Vrms |
| Appearance |
Housing: Metal |
| Dimension: 132×112×44mm |
| Weight: 400g |
| Other features |
CPU: Cortex A7 Core. 900MHz/867Mbps |
| Flash/RAM: 16Mb / 128Mb DDR2 |
| Working temperature: -30 ~ +75℃ (can be
extended) |
| Storage temperature: -40 ~ +85℃ |
| Relative humidity: <95% (No
condensation) |
