| P3026-24PoE-V2TF4MA |
| Ports |
24*10/100/1000M
PoE RJ45 ports |
| 4*10G SFP+ ports |
| Management port |
1x
Console port |
| Reset
key |
1x Reset key,
for restore default settings |
| Switching Capacity |
598G |
| PoE Feature |
IEEE802.3af/at |
| Support PoE management, PoE schedule,
Information of PoE status. |
| Packet Forwarding Rate |
95Mpps
@ 64byts |
| Operating
temperature |
-20~+55°C |
| Input
voltage |
AC:
110˜240V/50˜60Hz |
| Total power consumption |
600W |
| Protocol &
Standard |
IEEE
802.3,10BASE-T Ethernet; |
| IEEE 802.3u, fast Ethernet Standard; |
| IEEE 802.3ab, gigabit Ethernet Standard; |
| IEEE 802.3z, gigabit Ethernet Fiber
Standard;(AOC fiber cable) |
| IEEE 802.3ae,10G Ethernet Standard; |
| IEEE 802.3x, full-duplex Ethernet data link
layer flow control; |
| MAC |
32K |
| supports automatic updates, two-way learning; |
| SRAM Buffer |
32Mb |
| VLAN |
Support
up to 4K VLAN; |
| Support port-based VLAN; |
| Support 802.1Q tag-based VLAN; |
| Spanning Tree |
STP,
RSTP, MSTP |
| Port Aggregation
(TRUNK) |
Support
4x 10G ports aggregation, support 32x
gigabit ports aggregation |
| Support 16x groups aggregation |
| Port Mirroring |
Support
multiple to single Port mirroring, no limit for quantity of mirroring source ports |
| Port Isolation |
Support
downstream ports isolated from each other,
while opening communication with upstream ports |
| Port Flow Control |
Support
half-duplex back pressure based control; |
| Support full-duplex PAUSE frame based control; |
| Port Speed Limit |
Support
port-based input/output bandwidth
management |
| Storm Control |
Prevents
traffic on a LAN from being disrupted by a
broadcast, multicast, or unicast storm on a port |
| Support port storm threshold setting |
| Security Features |
Hardware
support port-based IP+MAC Binding; |
| Hardware support port-based ARP inspection detection; |
| QOS |
SP
(Strict Priority); |
| WFQ (Weighted Fair Queuing); |
| WRR (Weighted Round Robin); |
| Head Of Line; |
| Best-Effort Service; |
| First come first served; |
| 802.1p; |
| Cos/Tos, QOS; |
| Differentiated Service; |
| Network Cable Line Sequence |
Support
Auto-MDIX, automatic Identification
straight-through cable and crossover cable |
| cable
diagnosis |
Support cable
diagnosis, Cable quality (differential
pair impedance 85ohm ~ 125ohm), cable length, a short-circuit line |
| Negotiation Mode |
Support
port auto-negotiation function (auto-
negotiation transmission rate and duplex mode) |
| System
Maintenance |
Support
configuration file upload/download; |
| Support update packet upload; |
| Support WEB reset; |
| Reset by pressing key; |
| Support system log save/output; |
| Network Management |
Support
WEB management ; |
| Support CLI management ; |
| Product Description |
28-port 10G L2+ Managed PoE Switch,
24*10/100/1000M PoE RJ45 ports + 4*10G
SFP+ ports, compliant with both IEEE 802.3af/at
standard.
Max PoE port power: 30W, can be set by
management system.
Total input power is 600W.
Note: Default power supply pin type is end-
span(1/2+, 3/6-) |
