첨부파일 다운로드
-
Specification
S5500-8G-V3GF24T4.pdf
- 확장자 :
- 파일크기 :
- 2.52MB
Product Features
· The S5500-8G-V3GF24T4 is a 10G uplink L3 managed Ethernet fiber switch. It has 8*10/100/1000Base-T RJ45 ports and 24*100/1000Base-X SFP ports and 4*1/10G SFP+fiber slot ports. Each port can support wire-speed forwarding.
· The S5500-8G-V3GF24T4 has L3 network management function, support IPV4/IPV6 management, dynamic routing and forwarding, complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain.
Model | S5500-8G-V3GF24T4 |
Interface Characteristics | |
Fixed Port | 8*10/100/1000Base-T
RJ45 ports (Data) 24*100/1000Base-X SFP ports (Data) 4*1/10G SFP+ fiber slot ports (Data) 1*Console RS232 port (115200,N,8,1) |
Ethernet Port | Port 1-8 support 10/100/1000Base-T,auto-sensing,Full/half
duplex MDI/MDI-X self-adaption |
Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) |
Optical Fiber Port | 1/10G SFP+ optical fiber port, default no include optical
modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) |
Optical Fiber Port Expansion |
Support Turbo overclocking 2.5G optical module expansion and
ring network |
Optical Cable/ Distance |
Multi-mode:
850nm / 0~500M(1.25G), 0~300M(10G), Single-mode: 1310nm / 0~ 40KM, 1550nm / 0~120KM. |
Chip Parameter | |
Network Management Type |
L3 |
Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i
10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3ae 10GBase-SR/LR, IEEE802.3x |
Forwarding Mode | Store and Forward(Full Wire Speed) |
Switching Capacity | 598Gbps |
Forwarding Rate@64byte |
107.14Mpps |
MAC | 32K |
Buffer Memory | 32M |
Jumbo Frame | 9.6K |
CPU(Hz) | 500M |
DRAM | 2G |
Flash | 128M |
LED Indicator | Power: PWR
(Yellow), System: SYS(Yellow), Network: Link (Yellow), Fiber port: L/A (Green) |
Reset Switch | Yes, press
and hold the switch for 10 seconds and release it to restore the factory settings |
Power Supply | |
Total PWR / Input Voltage |
60W/(AC100-240V) |
Power Consumption | Standby<20W, Full Load<45W |
Power Supply | Built-in power supply, AC 100~240V 50-60Hz 1.0A |
Physical Parameter | |
Operation
TEMP / Humidity |
-20~+55°C, 5%~90% RH Non condensing |
Storage TEMP / Humidity |
-40~+80°C, 5%~95% RH Non condensing |
Dimension (L*W*H) | 440*290*44.5mm |
Net /Gross Weight | <3.5kg / <4.3kg |
Installation | Desktop, 19 inch 1U cabinet installation |
Certification & Warranty | |
Lightning Protection | Lightning protection: 4KV 8/20us, Protection level: IP30 |
Certification | CCC, CE
mark, commercial, CE/LVD EN60950, FCC Part 15 Class B, RoHS |
Warranty | 3 years, lifelong maintenance. |
Network Management Features | |
Interface | IEEE802.3X
(Full-duplex) Port temperature protection setting No connection port automatic sleep Port green Ethernet Energy-saving setting Broadcast storm control based on port speed SFP+ optical port DDMI real-time digital diagnosis The speed limit of the message flow in the access port, minimum particle size is 64Kbps. |
Layer 3 Features | IPV4 Equal Cost Routing NG protocol, maximum 1000 entries ARP protocol, maximum 1000 entries Pingv6, Telnetv6, TFTPv6, DNSv6, ICMPv6 IPV4/IPV6 VRRP, the maximum group is 255 IPV4/IPV6 VLANIF interface supports up to 128 IPV4/IPV6 static route/default route supports up to 128 entries L3 network management function, IPV4/IPV6 dual-stack management IPV4 dynamic routing, RIPv1/v2, OSPFv2, BGP4+, 4000 routing entries IPV6 dynamic routing OSPFv3, BGP+, RIPng, IPV6 management, 1000 routing entries Layer 3 routing and forwarding, support communication between different network segments and different VLANs |
VLAN | Voice VLAN, QinQ configuration,
IEEE802.1q VLAN based on MAC, VLAN based on the protocol 4K VLAN based on port,Port configuration of Access, Trunk, Hybrid |
Port Aggregation | LACP, Static
aggregation Max 18 aggregation groups and 8 ports per group. |
Spanning Tree | STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s) |
Industrial Ring Network Protocol |
G.8032
(ERPS), Recovery time less than 20ms 250 Ring at most, Max 250 devices per ring. |
Multicast | MLD Snooping
v1/v2, Multicast VLAN IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out |
Port Mirroring | Bidirectional data mirroring based on port |
QoS | Flow-based Rate Limiting
Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
ACL | Port-based Issuing ACL,ACL
based on port and VLAN L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. |
Security | IP-MAC-VLAN-Port binding ARP
inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit Mac black holes, IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection |
DHCP | DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay |
Management | CPU instant
utilization status view Console/AUX Modem/Telnet/SSH2.0 CLI One-key recovery,
Cable Diagnose, LLDP Web Management (HTTPS), NTP, System work log, Ping Test NMS- Smart Network Management System Platform (LLDP+SNMP) Download & Management on FTP, TFTP, Xmodem, SFTP, SNMP V1/V2C/V3 |
System | Category 5 Ethernet network
cable Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later; TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network |