Model |
P3006-4POE-V2MU |
Interface Characteristics |
Fixed Port |
4*10/100Base-TX
PoE ports (Data/Power) |
2*10/100Base-TX
uplink RJ45 ports (Data) |
Ethernet Port |
Port 1-6/1-10
can support 10/100Base-TX auto-detection, full/half-duplex |
MDI/MDI-X
auto-sensing |
Functional Switch |
1*(Extend+ VLAN) |
Note: when the switch state changes, it must
be restarted before the PoE |
switch
function can take effect |
Twisted Pair Transmission |
10BASE-TX: Cat5
or later UTP(≤250 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter) |
Chip
Parameter |
Network Protocol |
IEEE802.3
10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3x |
Forwarding
Mode |
Store and
Forward(Full Wire Speed) |
Switching Capacity |
1.6Gbps
(Non-blocking) |
Forwarding Rate@64byte |
0.98Mpps |
MAC |
1K |
Buffer Memory |
768K |
Jumbo Frame |
9.6K |
LED Indicator |
Power:PWR
(Green), network : L/A(Yellow), PoE : PoE (Green) |
Functional
switch: EXTEND (Green) |
PoE
& Power Supply |
PoE Port |
Port 1 to 4 |
Power
Supply Pin |
Default 1/2(+), 3/6(-) |
Max
Power Per Port |
30W, IEEE802.3af/at |
Total
PWR / Input Voltage |
65W/ (AC100-240V) |
Power
Consumption |
Standby<3W, Full load <65W |
Power
Supply |
Built-in power supply,
AC100~240V 50-60Hz 1A |
Physical
Parameter |
Operation
TEMP / Humidity |
-20~+55°C;5%~90% RH Non
condensing |
Storage
TEMP / Humidity |
-40~+75°C;5%~95% RH Non
condensing |
Dimension
(L*W*H) |
140*115*40mm |
Net
/Gross Weight |
<0.6kg / <1kg |
Installation |
Desktop, wall-mounted |
Certification
& Warranty |
Lightning
Protection / Protection Level |
Lightning protection: 4KV
8/20us, Protection level: IP30 |
Certification |
CCC, CE mark, commercial, CE/LVD
EN60950 |
FCC Part
15 Class B, RoHS |
Warranty |
1 year, lifelong maintenance. |