| Mode |
UFC8000HP |
| Technology |
| Standard |
Support
IEEE802.3, IEEE802.3u, IEEE802.3x,
IEEE802.3z/ab, IEEE802.1Q, IEEE802.1p,
IEEE802.1D, IEEE802.1W |
| Protocol |
ARP,
ICMP, TCP, DHCP, DNS, HTTP, UF -Ring, RSTP,
SNMP,ERPS, Telnet,SSH |
| Flow control |
IEEE802.3x
flow control, back press flow control |
| POE Standard |
IEEE802.3af/at |
| Function |
| Switch function |
UF
-Ring, QoS, 802.1QVLAN, RSTP, MSTP,ERPS |
| SNMP, Port trunking, static multicast filter, port mirroring, bandwidth management, broadcast
storm control, port flow |
| statistics, upgrade online, up and download configuration file, user name access system |
| UF -Ring |
Support
Single, Couple, Chain, Dual homing |
| Exchange attribute |
| 1000M forward speed |
1488100pps |
| 1000M maximum filter
speed |
1488100pps |
| Transmit mode |
store
and forward |
| System exchange bandwidth |
26G |
| MAC address table |
8K |
| Memory |
1M |
| Interface |
| Ethernet Port |
10/100/1000Base-TX
auto speed control, Half/full duplex
and MDI/MDI-X auto detect |
| PoE Pin-out |
1/2(+),
3/6(-) |
| Gigabit Combo port |
100/1000/2.5GBase-X
SFP slot |
| I/O Port |
2
input and 2 output(SNMP) |
| Console port |
debug
serial port carry out CLI command
Temperature sensing & I/O control(SNMP) |
| Alarm port |
2
bit 7.62mm terminal block 1 channel
relay alarm output |
| Current load capacity 1A@24VDC |
| Transfer distance |
| Twisted cable |
100M
(standard CAT5/CAT5e cable) |
| Multi-mode |
1310nm,
2Km |
| Single-mode |
1310nm,
20/40/60Km / 1550nm, 80/100/120Km |
| LED Indicator |
| Run indicator |
Run |
| Interface indicator |
Link
(1~8/G1~G2) |
| POE indicator |
44204 |
| Power supply indicator |
P1,
P2 |
| Alarm indicator |
Alarm |
