본문바로가기
  • Home
  • Solution
  • Network Solution

Network Solution

P3010-8POE-MHF2
P3010-8POE-MHF2

Network Solution PoE SWITCH L2 PoE

P3010-8POE-MHF2

10-port Full Gigabit Managed Fiber PoE Switch

Member Price
Please login.

Product Features

· The P3010-8POE-MHF2 series is a L2+ managed PoE fiber switch. It has 8*10/100/1000Base-T RJ45 ports and 2*100/1000Base-X SFP fiber slot ports . Port 1-8 can support IEEE 802.3af/at standard PoE power supply.
single port PoE power reaches 30W, and the maximum PoE output power is 130W(at-250W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable.


Model  P3010-8POE-MHF2 P3010-8POE-MHF2-at 
Interface Characteristics 
Fixed Port  8*10/100/1000Base-T PoE ports (Data/Power)
2*100/1000Base-X uplink SFP slot ports
1 * RS232 console port(115200,N,8,1) 
Ethernet Port  10/100/1000Base-T(X),auto-sensing,Full/half duplex MDI/MDI-X
self-adaption 
Twisted Pair Transmission  10BASE-T: Cat3,4,5 UTP(100 meter)
100BASE-TX: Cat5 or later UTP(
100 meter)
1000BASE-T: Cat5e or later UTP(
100 meter) 
SFP Slot Port  Gigabit SFP optical fiber interface, default matching optical modules
(optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) 
Optical Cable  Multi mode: 850nm 0 ~ 550M,single mode: 1310nm 0 ~ 40KM, 1550nm
0 ~ 120KM. 
Chip Parameter 
Network
Management Type
L2+ 
Network Protocol  IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;
IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X
IEEE802.3x 
Forwarding Mode  Store and Forward(Full Wire Speed) 
Switching Capacity  192Gbps (Non-blocking) 
Forwarding
Rate@64byte 
14.88Mpps 
MAC  8K 
Buffer Memory  6M 
Jumbo Frame  9.6K 
LED Indicator  Power : PWR (green), system : SYS ( green), network: Link (yellow),
fiber port :L/A (green), POE: PoE (green) 
Reset Switch  Yes, One-button factory reset 
PoE & Power 
PoE Port  Port 1 to 8 IEEE802.3af/at @ POE 
PoE Management  Total power limit of PoE power supply
PoE output power allocation, off& af &at PoE output priority configuration
PoE working status
Delay start of power supply Scheduling of PoE operation and time 
Power Supply Pin  Defaul 1/2 (+), 3/6 (-) 
Max Power Per Port  30W; IEEE802.3af/at 
Total PWR / Input Voltage  130W (AC100-240V)  250W (AC100-240V) 
Power Consumption  Standby<8W, Full Load<120W  Standby<10W, Full Load<240W 
Power Supply  Built-in power supply, AC 100~240V
50-60Hz 2.3A 
Built-in power supply,
AC 100~240V
50-60Hz 4.1A 
Physical Parameter 
Operation TEMP / Humidity  -20~+55°C, 5%~90% RH Non condensing 
Storage TEMP / Humidity  -40~+75°C, 5%~95% RH Non condensing 
Dimension (L*W*H)  270*181*44.5mm 
Net /Gross Weight  <1.7kg / <2.2kg 
Installation  Desktop, 19 inch 1U cabinet 
Certification & Warranty 
Lightning protection / protection level   Lightning protection: 4KV 8/20us; Protection level: IP30 
Certification  CCC,CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B;
RoHS 
Warranty  3 years, lifelong maintenance. 
Network Management Features 
Interface  IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet Energy-saving setting Broadcast storm control based on port speed
The speed limit of the message flow in the access port. The minimum particle size is 64Kbps. 
Layer 3 Features  L2+ network management ,IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs 
VLAN  4K VLAN based on port, IEEE802.1q
VLAN based on the protocol VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid 
Port Aggregation  LACP, Static aggregation
Max 5 aggregation groups and 8 ports per group. 
Spanning Tree  STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) 
Industrial Ring  G.8032 (ERPS),Recovery time less than 20ms 
Network Protocol  250 Ring at most, Max 254 devices per ring. 
Multicast  MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 250 multicast groups, Fast log out 
Port Mirroring  Bidirectional data mirroring based on port 
QoS  Flow-Flow-based Rate Limiting
Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping
Diff-Serv QoS,Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR) based Rate Limiting 
ACL  Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message.
Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. 
Security  IP-MAC-IP-MAC-VLAN-Port binding
ARP inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit
Mac black holes,IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum
SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection VLAN-Port binding 
DHCP  DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay 
Management  One-key recovery
Cable Diagnose,LLDP
Web Management (HTTPS) NTP,System work log,Ping Test CPU instant utilization status view
Console/AUX Modem/Telnet/SSH2.0 CLI
Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
NMS - smart network management system platform(LLDP+SNMP) 
System  Category 5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network