| Model |
UFC8000HP-V2 |
UFC8000HP-V2-at |
| Interface Characteristics |
| Fixed Port |
8*10/100/1000Base-T PoE ports (Data/Power)
2*100/1000Base-X uplink SFP slot ports (Data)
1 * RS232 console port(115200,N,8,1)
2 set of V+, V- redundant DC power interface
(5 Pin Phoenix terminal) |
| Ethernet
Port |
Port 1-8 support 10/100/1000Base-T,auto- sensing,Full/half duplex MDI/MDI-X self-adaption |
| Twisted
Pair Transmission |
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later
UTP(≤100 meter) |
| SFP
Slot Port |
Gigabit SFP optical fiber interface, default
matching optical modules
(optional order single-mode / multi-mode, single fiber / dual fiber optical
module. LC) |
| Optical
Cable |
Multi mode: 850nm 0 ~ 500M, Multi mode: 850nm 0 ~ 500M,
single mode: 1310nm 0 ~ 40KM, 1550nm
0 ~ 120KM. |
| Chip Parameter |
| Network
Management Type |
L2+ |
| Network
Protocol |
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-TX IEEE802.3z 1000Base-X,
IEEE802.3x |
| Forwarding
Mode |
Store and Forward(Full Wire Speed) |
| Switching Capacity |
192Gbps |
| Forwarding Rate@64byte |
14.88Mpps |
| MAC |
8K |
| Buffer Memory |
4M |
| Jumbo Frame |
9.6K |
| LED Indicator |
Power: PWR (yellow), System : SYS (yellow) ,
Network: Link (yellow),
Fiber port: L/A (green), PoE: PoE (green) |
| Reset
Switch |
Yes, Press and hold the reset switch for 10s
and release it to restore the factory settings |
| PoE & Power |
| PoE Port |
Port 1 to port 8 |
| PoE Management |
PoE working status
Delay start of power supply
PoE output priority configuration Scheduling of PoE operation and time
Total power limit of PoE power supply PoE output power allocation, off&
af &at |
| Power
Supply Pin |
Default: 1/2 (+), 3/6 (-) |
| Max Power Per Port |
30W; IEEE802.3af/at |
| Total
PWR / Input
Voltage |
120W/48VDC |
240W/48VDC |
| Power Consumption |
Standby<8W, Full load<120W |
Standby<10W, Full load<240W |
| Working
Voltage |
48-57VDC; 5 Pin industrial Phoenix terminal, support anti-reverse protection. |
| Power
Supply |
No, optional 48V/120W or 48V/240W industrial power supply |
| Physical Parameter |
| Operation TEMP / Humidity |
-40~+80°C;5%~90% RH Non condensing |
| Storage
TEMP /
Humidity |
-40~+85°C;5%~95% RH Non condensing |
| Dimension (L*W*H) |
165*148*54mm |
| Net
/Gross Weight |
<0.8kg / <1.2kg |
| Installation |
Desktop, DIN rail |
| Certification & Warranty |
| Lightning protection / protection level |
Lightning protection: 6KV 8/20us;
Lightning protection: 6KV 8/20us;
Protection level: IP40
IEC61000-4-2(ESD):±8kV contact discharge, ±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT):power cable:
±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:
CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m IEC61000-4-10(damped
oscillation):30A/m 1MHz IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission): 30V; 300V,1s FCC Part
15/CISPR22(EN55022):Class A
IEC61000-6-2(Common Industrial Standard) |
| Mechanical
Properties |
IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock) IEC60068-2-32 (free fall) |
| Certification |
CCC;CE mark, commercial; CE/LVD
EN60950;FCC Part 15 Class B; RoHS; |
| Warranty |
5 years , lifelong maintenance. |
| Network Management Features |
| Interface |
IEEE802.3X (Full-duplex)
IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet Energy-saving setting Broadcast storm control based on
port speed
The speed limit of the message flow in the access port. The minimum particle
size is 64Kbps. |
| Layer 3
Features |
L2+
network management ,IPV4/IPV6 management
L3 soft routing forwarding, Static route, Default route @ 128 pcs, APR @
1024 pcs |
| VLAN |
4K
VLAN based on port,
IEEE802.1q VLAN based on the protocol VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid |
| Port
Aggregation |
LACP,
Static aggregation Max 5 aggregation
groups and 8 ports per group. |
| Spanning
Tree |
STP
(IEEE802.1d),RSTP (IEEE802.1w),MSTP
(IEEE802.1s) |
| Industrial
Ring |
G.8032
(ERPS),Recovery time less than 20ms
250 Ring at most, Max 1024 devices per ring. |
| Multicast |
MLD
Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out |
| Port
Mirroring |
Bidirectional
data mirroring based on port |
| QoS |
Flow-based
Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port 802.1p/DSCP priority mapping
Diff-Serv QoS,Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
| ACL |
Port-based
Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL
based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol
Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. |
| Security |
IP-MAC-VLAN-Port
binding
ARP inspection,Anti-DoS attack AAA & RADIUS,MAC learning limit
Mac black holes,IP source protection IEEE802.1X & MAC address
authentication Broadcast storm control,Backup for host datum
SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical
management and password protection |
| DHCP |
One-key
recovery Cable Diagnose,
LLDP
Web Management (HTTPS) NTP,
System work log,Ping Test CPU instant utilization status view |
| Management |
One-key
recovery Cable Diagnose,
Console/AUX Modem/Telnet/SSH2.0 CLI
Download & Management on FTP, TFTP,
Xmodem, SFTP,SNMP V1/V2C/V3
NMS - smart network management system platform(LLDP+SNMP) |
| System |
Category
5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or
higher, Microsoft Internet Explorer10 or later;
TCP/IP, network adapter, and network operating system (such as Microsoft
Windows, Linux, or Mac OS X) installed on each computer in a network |
