P3010-8PoE-V2GFP

»» All Gigabit design, 8x Gigabit Ethernet RJ45 ports with AutoUplink™ , 1x console port, and 2x Gigabit SFP slots.

»» 8 PoE ports support power over Ethernet for PDs

»» Meet IEEE 802.3af/atPoE standard. Supports per port PoE configuration function

»» L2+ features provide better manageability, security, QoS, and performance.

»» Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP,

POE+ management, IP Source Guard, ARP inspection, ACLs etc.

»» Support spanning tree STP(802.1D) and RSTP(802.1W).

»» Jumbo frames support up to 9.6K kilobtyes.

»» Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.

»» Support cable diagnosis

»» G.8032, support <50ms industrial quick ring protection


Product ModelP3010-8PoE-V2GFP
Capacity in Millions of Packets per Second (mpps)4M (64-byte packets) (Buffer Memory)
Packet Forwarding Rate14.88Mpps
Switching Capacity in Gigabits per Second (Gbps) (Bandwidth)192G
Interface Ports8-Port 10/100/1000Base-T + 2xGigabit SFP slots + 1 console port
Spanning Tree Protocol (STP)Standard Spanning Tree 802.1d
Rapid Spanning Tree (RSTP) 802.1w
G.8032 ERPS<50ms ring protection for industrial high reliable application
AggregationLink Aggregation Control Protocol (LACP) IEEE 802.3ad;
Up to 13 groups ; Up to 16 ports per group
VLANSupport up to 4K VLANs simultaneously (out of 4096 VLAN IDs) ;
Port-based VLAN; 802.1Q tag-based VLAN
IGMP v1/v2 snoopingIGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1024 multicast groups (source-specific multicasting is not supported)
Secure Shell (SSH) ProtocolSSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
Secure Sockets Layer(SSL), HTTPSSSL encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch
Port SecurityLocks MAC Addresses to ports, and limits the number of learned MAC addresses
DHCP Snoopingprevent unauthorized configuration and use of IP addresses,
while providing support for IP Source Guard and ARP detection
IP Source GuardPrevents datagram with spoofed addresses from being in the network
ARP InspectionPrevent ARP spoofing attacks and ARP
Storm controlPrevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
ACLsSupport for up to 256 entries; Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
Hardware Priority QueueSupport 8 hardware queues
Scheduling8 COS queues per port support strict priority and weighted round-robin (WRR)
ClassificationPort based; 802.1p(PCP) VLAN priority based;
Rate LimitingIngress policer;egress shaping and rate control;per VLAN,per port and flow based
Web GUI interfaceBuilt-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs).
Supports configuration, system dashboard, maintenance, and monitoring
Dual ImageDual image provides independent primary and secondary OS files for backup while upgrading
Firmware upgradeWeb browser upgrade (HTTP/ HTTPs) and TFTP; Upgrade through console port as well
Port mirroringTraffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported.
Other managementSingle IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support)
Green and Energy-saving Ethernet (EEE)Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power onGigabit Ethernet RJ-45 port when detecting link down or Idle of client.
Active mode is resumed without loss of any packets when the switch detects the link up
Cable length detectionAdjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter.
Jumbo framesFrame sizes up to 9KB supported on Gigabit interfaces
MAC TableUp to 8K MAC addresses.
Link Layer Discovery Protocol (LLDP)Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network, principally wired Ethernet.
PoEPoE Standard: IEEE802.3af/at
PoE Port Power: Max. Power per PoE Port: 30W;
Switch’s total power: 130W
PoE Ports: 8 ports support PoE
Power Pin Type: End-span(Mid-span optional)
Minimum RequirementsWeb browser: Mozilla Firefox version 2.5 or later,
Microsoft Internet Explorer version 6 or later;
Category 5 Ethernet network cable;
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in network
Dimensions279 x 210x 44mm
Working EnvironmentOperating temperature: -20 to 55℃;
Storage temperature: -40℃ to 85℃;
Operating humidity:5% to 95% , relative, non-condensing

Loading...