Remote power feeding up to 100m
Supports PoE Power up to 30W for PoE port
IEEE 802.3at Power over Ethernet Plus compliant
Backward compatible with IEEE 802.3af Power over Ethernet
Auto-detection of PoE IEEE 802.3at/af devices from being damaged by incorrect installation
Circuit protection prevents power interference between ports
Circuit Shorting Protection Supported
Department / Workgroup PoE Network
Providing 4/8-port PoE in-line power interfaces, the P1000 can easily build a power centrally-controlled IP phone system, IP Camera system and Wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power-socket limitation, the P1000 makes the installation of cameras easier and more efficient.
Energy conservation, and low radiation
The P1000 uses an energy-saving integrated circuit design to ensure even heat dissipation. Idle ports can enter a sleep mode to further reduce power consumption. Radiation produced by the P1000 is within the standard range for electric appliances and causes no harm to the human body.
Easy deployment and maintenance free
Providing data transfer and High Power PoE in one unit, the P1000 is able to reduce the need of extension cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ-45 copper interfaces of the P1000 supports 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
5*10/100 Base-T ports(4*POE)
8*10/100 Base-T ports(4*POE)
8*10/100 Base-T ports(8*POE)
Power Pin Assignment
PoE Power Output
Per Port 53V DC
Packet Forwarding Capacity
Operating temperature: 0℃–50℃
Relative humidity: 5%–95% (non-condensing)